2023 GrowLED Pack: The Next-Generation Indoor Grow Kit
The 2023 GrowLED Pack revolutionizes the approach to indoor growing with a complete kit designed for growers who want reliable equipment without the hassle. This pack integrates the latest Samsung LED innovations, an optimized ventilation system, and everything you need to start or upgrade your setup. No more piecemeal purchases and incompatibilities: everything is calibrated to work together right out of the box.
Specifically designed for 120x60 cm grow spaces, this 2023 pack combines energy efficiency and ease of installation. The Samsung LM301H LEDs offer a full spectrum with an efficiency of 2.9 µmol/J, while the ventilation system ensures optimal air renewal for your plants.
Why choose the 2023 Pack for your indoor grow
The true strength of the 2023 Pack is its all-in-one approach that eliminates beginner mistakes. The integrated Samsung LEDs deliver a true 240W with a 3000K + 660nm full spectrum, perfect for covering all growth phases. The BloomLED SpectraWILD included in this pack boasts 2.9 µmol/J of photosynthetic efficiency, which is 30% more than older HPS generations.
The ventilation system included in this pack provides 187 m3/h, precisely calibrated for the 0.72 m² grow area. The 125mm carbon filter eliminates 99% of odors from day one, and frankly, that's where it makes all the difference in terms of discretion. No more calculating airflow or wondering if your extractor will be powerful enough.
Installation takes less than 2 hours flat. All cables are pre-sized, fixings are provided, and the installation manual details each step with photos. Even if you've never touched electrical wiring, you'll manage without a problem.
How to choose your 2023 Pack configuration
For a DS120W grow tent (120x60x200 cm), the standard 2023 Pack perfectly covers the space with its 240W LED. The light density reaches 333W/m², more than enough for professional-quality yields. If you're growing in a smaller space, you can adjust the intensity via the integrated dimmer from 0 to 100%.
The optimal hanging height is between 30 and 45 cm from the top of the plants depending on the phase. During vegetative growth, you'll raise it to 45 cm to avoid light stress. During flowering, you'll gradually lower it to 30 cm to maximize light penetration. The included suspension cables allow for millimeter-precise adjustment.
The included carbon filter has a lifespan of 12 to 18 months depending on usage. To optimize its longevity, ensure humidity is kept below 60% during flowering. The extractor runs continuously, but you can install a speed controller to adapt the airflow according to the grow phases.
Frequently Asked Questions
Which GrowLED Pack 2023 should I choose for a 120x60 cm area?
For a 120x60 cm (0.72 m²) area, the standard 2023 Pack is perfectly sized. Its 240W Samsung LEDs offer a density of 333W/m², ideal for all grow phases. The 3000K + 660nm full spectrum covers the needs from germination to harvest. This power allows for yields comparable to 400W HPS setups, but with 40% less power consumption and virtually no heat generated.
How to easily install the 2023 Pack in a DS120W grow tent?
Installation in a DS120W takes approximately 90 minutes. Start by attaching the LED suspension bars to the tent's upper rails, then connect the extractor to the top with the carbon filter. The ventilation ducts connect without tools thanks to the included clamps. Then plug the LED power supply into the mains and test the dimmer. The provided manual details each step with diagrams, and all cables are pre-sized to the correct lengths. No drilling or modification of the structure is necessary.
What is the difference between the 2023 Pack and older GrowLED packs in terms of Samsung LEDs?
The 2023 Pack integrates the latest generation Samsung LM301H chips, compared to the LM301B in older packs. This evolution brings 15% additional light efficiency, increasing from 2.5 to 2.9 µmol/J. The spectrum has also been optimized with the addition of 660nm red LEDs to boost flowering. The lifespan increases from 50,000 to 70,000 hours, and light degradation is halved after 5 years of use. Concretely, you get 20% more yield with the same power consumption.
How to use the BloomLED SpectraWILD from the 2023 Pack for growth and flowering?
The BloomLED SpectraWILD automatically adapts to both phases thanks to its full spectrum. During vegetative growth, set the intensity to 60-70% and suspend the LED 45 cm from the top of the plants. The 3000K spectrum promotes compact vegetative development. During flowering, gradually increase to 100% intensity and lower to 30 cm in height. The 660nm red LEDs then stimulate resin production and bud density. The dimmer allows for fine adjustments based on your plants' reaction, avoiding any light stress.
What maintenance is required for the ventilation and carbon filter of the GrowLED Pack 2023?
The extractor requires blade cleaning every 3 months to maintain its optimal flow rate of 187 m3/h. Use a dry brush to remove accumulated dust. The carbon filter should be changed every 12 to 18 months depending on the intensity of use. You'll know it's time to replace it when odors start to filter through despite extraction. To extend its lifespan, maintain humidity below 60% and avoid humidity spikes that saturate the activated carbon. The ducts should be cleaned with lukewarm water every 6 months to prevent particle accumulation.
